Trojan Pages

Trojan Chassis Kit

	Welded interlocked chassis 4 motors Wheels sets Sprung buffers Pin coupler to rear, hook coupling to front Coupling rods Delrin axle boxes

What Work Is Involved ? Assemble the wheel sets and mount the motors Assemble and fit coupling rod sets Mount the control board Wiring Drill and fix battery mounts Painting

	Items wou will need and may have to purchase 6mm flexible wire, spade connectors and connector blocks Control board and controller Batteries 1mm drill bits for keying in gears 4 mm tap and 3.3mm drill 5 mm tap and 4.2mm drill Thread Loc - oil tolerant preferable 8 mm spanner Filler and paint

Options

Choice of three buffer beams - with or without buffers

Traditional or industrial crank sets

How hard is it to build?

Instructions are on line -Click here to read
Speak to other owners and see pictures of their engines. Trojan Owners Page
Still want answers E mail RoR or call 01708 708768

Hardest bits? - Paul's list of difficult items

Drilling and tapping the cranks and crank pins - Pay extra and we will supply the crank set finished off
Drilling, tapping and fixing the nylon gears
Keying in metal gears to motor spindle
Keying in the wheels to the axles
Painting - getting paint right is probably the hardest bit.

Terms and conditions