Checking
the Chassis
|

|
1. Checking the chassis
- Before any assembly takes place 1st check you have all
the components. -Components
list
- All the laser cut steel components have been treated with
an oil/wax coating to stop it rusting. This coat should
be removed using white spirit before proceeding with
assembly.
- Check that all holes are clear and components fit
together. This should include fitting the spring support
plate and axle box guides and associated bolt holes. Use
a file to ease any components that you have trouble
assembling.
- To avoid the frustration of waiting for paint to dry and
delaying assembly it is worth painting the underside of
the chassis at this stage. Making sure the chassis is
grease free, prime the chassis, spring support plates and
axle box guides using a spray based zinc or red oxide
primer. Spray paints are readily available from most car
accessory shops.



